How To Install Under Cabinet Led Lights

Allow an extra 6 in. Complete the wiring process and connect all the lights that you need.

How To Install Under Cabinet Led Puck Lighting Youtube

Of flex where it enters the walls.

How to install under cabinet led lights. If using LED bar. The touch pad should pair with the wireless dimmer. Drill 1-18 in.

Hit Lights LED strip li. I review all products used. Ad A wide range of professional UV Lights UV Torches using the latest in UV LED Technology.

Ream the cut end of the flex to remove burrs and install flex connectors on both. Flex for each light or group of lights for the switch and for the power Photo 4 and Figure A. Plug in your receptacle tester to ensure you flipped the right breaker and the power is off.

Attach the lights under the cabinets string cable under the cabinet and staple the cable in place using cable staples. Place the light strip on the surface you wish to install it and make sure it is right where you want it. Holes through the cabinet sides and run 12-in.

Screw the wireless touch pads bracket to the wall and install the switch and cover plate. Check your local code before doing this. From small pocket sized UV LED torches through to large beam overhead UV LED arrays.

It is not allowed in some areas. From small pocket sized UV LED torches through to large beam overhead UV LED arrays. Cable Under the Cabinet.

Measure and cut carefully so the cable is flat along the length. Peel and stick the LEDs to the under-side of the cabinet above the sink. Learn how to install under cabinet lighting with no visible transformers no drilling in your cabinets.

A detailed description of installing LED Puck Lights from AIBOO as a hard-wired installationDont forget to use discount code. Cover the junction box with an approved cover plate. Here is how to install LED lights under your cabinets.

Disconnect the power then plug the power back in. Repair wall surfaces andor add access panel covers inside cabinets to conceal system components. Step-by-Step Guide for Installing LED Lights Under The Cabinet.

Remove the outlet where you plan to hardwire your under-cabinet lights. Ad A wide range of professional UV Lights UV Torches using the latest in UV LED Technology. Flip off the circuit breaker that powers the outlets in your kitchen.

Use flexible metal conduit to protect exposed cable or wires inside or behind cabinets. Restore power to the source circuit and test the lighting system.

Above Cabinet And Under Cabinet Led Lighting How To Install Led Strip Lights Super Bright Leds